The format for writing plans!

You can search for it online; they’re basically all similar, with no fixed format – as long as it meets the production requirements, that’s fine

1. Purpose 2. Scope of Application 3. Responsibilities 4. Work Procedures 5. Precautions 6. Exception Handling

1. Overview (Mainly explain the role, functions, and significance of the device, as well as its relationship with the process flow of related devices. Describe the role and structure of the main or key equipment used in testing (diagrams may be attached), along with their performance parameters.) ) 2. Purpose and scope of preparing the commissioning plan (mainly explain the purpose and function of preparing the plan, as well as the scope of the commissioning. ) 3. Basis for preparing the commissioning plan (Briefly describe the main criteria for preparing the commissioning plan, such as commissioning work specifications, construction acceptance standards, relevant technical requirements and instructions, etc.) ) 4. Conditions to be met before testing (It details the conditions required prior to testing, including equipment requirements, electrical and instrumentation requirements, process condition requirements, requirements for utility media, as well as the organizational structure of the relevant personnel along with clear definitions of their responsibilities.) ) 5. Preparatory work before testing (This should mainly include all preparations prior to testing, such as the conditions required from external parties, the preparation of relevant technical plans, the provision of safety protection equipment and emergency rescue supplies, communication support and related arrangements, the requirements regarding process conditions, as well as the readiness of water, electricity, gas, and steam. Personnel training for specific operational plans, drills for accident response plans, etc. ) 6. Operating procedures for testing (It is required to detail the specific steps to be followed during the testing process as well as the precautions that need to be taken. The description should be detailed, comprehensive, accurate, and easy to follow.) Every procedure must have specific tasks and standards, including returning to normal operation after testing is completed. ) 7. Analysis, judgment, and handling of abnormal situations (List in detail various abnormal situations or phenomena that may occur during testing, the criteria and methods for judging them, their causes, as well as the methods and procedures for handling them. The information should be detailed, specific, comprehensive, and practical to follow.) ) 8. Safety, environmental protection, and measures for handling waste materials – as well as relevant precautions. (A detailed analysis is provided of the potential safety hazards that may arise during testing, along with corresponding emergency response plans to address these hazards.) Key points for conducting clean and civilized testing of the equipment, major sources of substances that can cause pollution, precautions for achieving environmental protection, as well as measures for the discharge and treatment of waste materials. ) 9. Work after testing (archiving of testing data, holding a summary meeting, reflecting on the experiences and lessons learned from each step of the testing process, and preparing a testing report). 10. Appendices and charts (these should include schematic diagrams needed during testing, a schedule of materials and supplies required for testing, flowcharts, work outlines, inspection forms (with signatures of relevant personnel), and project schedules emphasizing time constraints). ）

Not bad; we can draw on it right now