In which department of those design institutes is the process design for heat exchangers carried out?
Thread Content
In which department of those design institutes is the process design for heat exchangers carried out?
Design institutes generally only focus on product design; process development and design are separate tasks. You can completely create your own process flow based on specific circumstances such as the equipment and site conditions
The process room or process team shall submit the parameters, once they have been finalized, to the equipment team for equipment design
It should be the process engineering team that sets the requirements for the equipment engineering team, who then designs according to those requirements.
The logic is sound, but with just one heat exchanger, will they even receive you? Unless they are very small design studios (which can of course also be called design institutes or main design agencies). It’s better to study \"Principles of Chemical Engineering\" on your own, understand the operating conditions, and design it by yourself! Generally speaking, there’s no need to rely on others for everything; things aren’t too complicated. If any problems arise, everyone can help come up with solutions.
Thank you 2# chihongjun
The key is to see whether what one designs is legal or not
I was also wondering about this question; thanks for sharing.
If it is a pressure vessel, design qualifications are required.