How to filter the dirty air?
Thread Content
The air entering a compressor is dirty, how is it filtered?
There is a bag filter at the inlet of the air compressor, and there is spray water on the first stage blade of the air compressor to further clean the air.
How about adding a gas scrubber in front of the inlet of section 1?
It is not appropriate to install a gas scrubber at the inlet section of the air compressor. However, there are now special air filters that should be able to solve the problem.
There is an air filter at the inlet of the air compressor, but the dust accumulated in the air filter needs to be cleaned frequently.
Large air compressor inlets have filters that are regularly replaced.
The inlet of the air compressor is equipped with a filter screen, a pre-filter element, and a post-filter element, which are cleaned regularly according to the pressure difference.
Haha, I am short-sighted, so please feel free to give me some advice. I made a post about flow, airspeed and pressure, and I would like all experts to help me answer it. Thanks in advance.
Our factory has three-stage filtration in front of the compressor, which is more effective. However, if the pressure difference is large, it must be cleaned in time.