Issues regarding the installation of multi-point temperature acquisition systems
Thread Content
We all know that a protective sleeve needs to be added around the temperature sensor used for measuring the temperature in tank areas. Dear experts, how is the temperature sensor inside the protective sleeve fixed? How to ensure the spacing?
I’m not quite sure what you’re asking. In short, the outer diameter of the sheath surrounding the temperature element is generally 1 mm smaller than the inner diameter of the protective sleeve; these two components are typically connected by threads. It is generally connected to the equipment via flanges.
What was said upstairs is absolutely correct. The sheath is generally connected using flanges, which are welded to the flanges on the pipeline. The connection to the temperature sensing element on the sleeve flange is a threaded connection. There are also sleeves that use threaded connections, but these are relatively rare.
My temperature sensor is placed inside a bellows, which is connected to the tank via threads or flanges. How is the PT-100 installed inside the bellows fixed? Note: 6 PT-100s need to be installed.
My temperature sensor is placed inside a bellows, which is connected to the tank via threads or flanges. How is the PT-100 installed inside the bellows fixed? Note: 6 PT-100s need to be installed.