New regulations issue~
Thread Content
After the implementation of "Consolidation". There is a in the design file: Manufacturing technical conditions! It seems that it has never been done before, but now it is mandatory for inspectors~ I would like to ask everyone if this is necessary. We are a production company and have no design qualification~ This is very troublesome.
It is the technical requirements for processing, manufacturing and inspection. It should be all on the drawings.
Some more complex containers usually have manufacturing technical conditions, which are actually technical requirements, but they have more content and cannot be placed in the drawings. Like methanol synthesis towers, hydrogenation reactors usually have technical conditions.
Conventional manufacturing process + control nodes, digest drawings and standard requirements
You said that you are a manufacturing unit and do not have a design qualification certificate. You should know whether the drawings are there when they come. It depends on the complexity of the pressure vessel!
It's just a technical requirement. If you want, just make a copy and give it to him according to the technical requirement.
It's just a technical requirement. If you want, just make a copy and give it to him according to the technical requirement.
It's just a technical requirement. If you want, just make a copy and give it to him according to the technical requirement.
It's just a technical requirement. If you want, just make a copy and give it to him according to the technical requirement.