Safety management issues of polysilicon

As long as everyone strengthens inspections to detect leaks promptly, carries out hot work in strict accordance with procedures, follows the operating rules during operations, adheres to the work order procedures during maintenance, and provides close supervision when loading and unloading materials from tank trucks, the key is to enhance the sense of responsibility in inspections as well as awareness of personal safety. All of these will only reduce the occurrence of accidents to a large extent, but they do not mean that accidents will not happen at all. You can also carefully study the four basic elements that cause accidents.

Responsibility is the top priority. Without a strong sense of responsibility, if one relies on luck, is self-righteous, and careless, no matter how thorough the technical measures may be, accidents will still occur.

That’s what is said, but the inspectors don’t think so; they are all from some rural areas in the vicinity

This post was last edited by zjiris on 2010-6-10 at 20:31. I work in the field of restoration, and I would like to share my views on hydrogenation processes. 1. One must be thoroughly familiar with the processes and procedures used in one’s own company; every detail of those procedures should be well understood. 2. Extreme care must be taken during the installation of pipelines and equipment; no issue that could pose a safety hazard in future operations should be overlooked, and such hazards should be addressed as early as possible. 3. Special attention must be paid during commissioning tests. Before any toxic materials are introduced, it is necessary to thoroughly check for leaks in the production line, as well as to ensure that control valves, two-position valves, and manual valves function properly without internal leaks. Additionally, instruments, control systems, and electrical components must be checked according to established procedures to ensure they are operating correctly. 4. Particular attention should be given to the proper functioning of the cooling system. Many accidents occur when the cooling medium stops flowing or is insufficiently supplied. In particular, there must be a backup pump for the cooling medium circulation pump, so that it can continue to operate in case of sudden failures. 5. During normal production, regular inspections must be carried out meticulously, with full attention paid to detail. Any issues discovered must be resolved promptly; it is crucial not to panic, but to remain calm and think clearly in order to find solutions. 6. When problems arise, one must be resourceful and able to adapt quickly to find solutions, depending on the situation. 7. In short, it is essential to learn to analyze and address each problem individually. Various issues can arise during polysilicon production, and although they may seem similar, their solutions can differ greatly. It is important to think carefully in advance about potential problems, so that they can be resolved promptly when they occur

Why are all the inspectors from rural areas near the factory? Does it solve the land issue? That won’t work; it must be done by someone who understands chemical production. If you assign someone who doesn’t know the subject to carry out inspections, they won’t know what to check or what route to follow, and they will simply give a superficial glance and call it a day.

We can’t decide who to hire; there’s nothing we can do about it