Request a calculation sheet for a circular foundation
Thread Content
I’m currently working on the foundation for an evaporator and am looking for a calculation guide for circular foundations. I hope my friends can help me out...
The calculation methods for circular and regular bases are the same
This post was last edited by bbsmoto on 2010-6-3 20:25. May I ask the person who posted above: for a 10-ton device with a foundation bearing capacity of 250 KPa, where the device is firmly connected to the foundation and the foundation is 500 units above the ground level, how should I determine the radius and depth of the circular foundation?
Who has solved my problem? ? :handshake
The questions regarding the upper structure lack necessary information: the diameter of the equipment, the diameter of the bolt holes, the height of the equipment, the local wind load, and although a foundation bearing capacity of 250 kPa is sufficient, it is not clear whether the soil quality beneath it is uniform Freezing depth?
Let’s all learn together*; for the question raised by the original poster, you can learn* the standard specifications of the petrochemical industry! ! !
For the question raised by the original poster, you can study the basic knowledge of equipment in the petrochemical industry, as well as the standard specifications for tower types and similar things! ! !