Synthesis cycle machine surge|!
Thread Content
Why does a synthetic compressor surge! What causes it mainly!
Causes of compressor surge: 1. Failure of the anti-surge system, with automatic mode not activated or incorrect setting values. 2. The suction flow rate of the compressor is too low or the pressure is insufficient, such as a clogged inlet filter or failed inter-stage seals. 3. The gas exiting the compressor is blocked, such as system overpressure, a sudden drop in speed, or a malfunctioning outlet check valve. 4. Improper operation, such as too rapid pressure increase. 5. Changes in gas parameters that cause the operating conditions to enter the surge zone, such as changes in composition that reduce the molecular weight, excessively high inlet temperature, or failed inter-stage coolers.
Reply to 1# Gao Juanni: I have a document on compressor surge that I can send you; please contact me via QQ email
Reply to 3# Ye Yu Han 309423662@qq.com Thank you! Oh
Could you send one to me as well, 794410292@QQ. COM, thank you
Could you send me one at 297546226@ as well? QQ, thank you
Reply to 4# Gao Juanni: Could you give me one? shxfyglx@163.com
Reply to 3# Night Rain Cold: I also need to thank z-h-j789@163.com
aiaiqiuqiu@126.com, thank you, haha~~
Reply to 3# Night Rain Cold: Hello, I just saw your post! Hehe, I’d like to get some materials from you too. Thank you in advance! 568776295@qq.com
I want one too, thank you! ! djgreatwall@hotmail.com