Are there any regulations regarding the design of molten salt pipelines?
Thread Content
Are there any regulations regarding the design of molten salt pipelines?
It’s about heat resistance; using alloy steel should meet the requirements
When designing and installing molten salt pipelines, it is necessary to ensure a certain slope so that the molten salt in all pipelines can flow by gravity to the molten salt tank at the lowest point when needed, thereby preventing blockages in the pipelines
For molten salt pipelines, first, good heating is necessary; generally, MP heating is used for this purpose. Second, the pipelines must have a slope to ensure that there are no dead corners when discharging the salt.
Key design points for molten salt pipelines: 1. There must be a slope to ensure self-flow back to the salt tank under all conditions; 2. Steam heat transfer is required during startup and shutdown