There is an error when reading from Fluent; please help analyze it
Thread Content
Reading “F:\jishu\si*eyejiang\jiaoban.msh”… 897769 nodes. 99324 mixed wall faces, zone 4. 12044 mixed wall faces, zone 5. 3068 mixed wall faces, zone 6. 9288 mixed wall faces, zone 7. 2494 mixed wall faces, zone 8. 12044 mixed wall faces, zone 9. 3068 mixed wall faces, zone 10. 9844 mixed wall faces, zone 11. 10251363 mixed interior faces, zone 13. 4689220 tetrahedral cells, zone 2. 474255 tetrahedral cells, zone 3. Building… grid. Note: Separating interior zone 13 into zones 13 and 1. default-interior -> default-interior (13) and default-interior:001 (1). Error: add_memory_block: failed to allocate memory block. Error Object: ()
It’s possible that the boundary type of the intersection surface between the two zones is incorrect; it should be set to \"interior\", or it can be set to \"wall\" and then changed to \"interior\" in Fluent. It depends on how it’s set up in the manual for this specific case.
Reply to 2# iisshen: Is the interface two surfaces, or do those two surfaces need to be connected using a ‘connect’ function?