What are the main components of the hypersperse MDC200 scale inhibitor?

Could the original poster please introduce the properties and uses of scale inhibitors?

Hypersperse MDC200 scale inhibitor? I’ve never heard of it!

Hypersperse MDC200 scale inhibitor? I’ve never heard of it!

Hypersperse MDC220 scale inhibitor ◇Product features 1、Compliant with drinking water certification standards (ANSI/NSF60 certification)； 2. Compatible with organic flocculants such as SoliSep MPT150 and ST ； 3. Effectively control scaling caused by calcium carbonate, calcium sulfate, and strontium sulfate ； The LSI of calcium carbonate is as high as +3.0, so scaling does not occur ； 4. Suitable for all major reverse osmosis membranes ； 5. Disperse blocking particles to keep the surface of the reverse osmosis membrane clean ； 6. The pH range of the incoming water, from 5 to 9, remains within the effective range ； 7. It can be added directly or used after dilution. The hypersperse MDC220 can be used to control scaling and precipitation in membrane separation systems and reduce particle clogging. ◇Product specifications: 1. Appearance: Clear amber liquid. 2. Density: 1.15±0.05. 3. pH (5%): 2.5±0.5. 4. Freezing point: -15°C. 5. Minimum storage temperature: -12°C. 6. Viscosity: 1.79 cp (25°C). ◇ Instructions for use: Hyperspere MDC220 is a high-performance liquid scale/inhibition/dispersant used to prevent scaling caused by the precipitation of calcium carbonate, sulfates, and iron oxide in membrane separation systems. Using this scale inhibitor can extend the cleaning cycle of the system, prolong the lifespan of the membrane, and reduce costs. The hypersperse MDC220 has been widely used in reverse osmosis and nanofiltration systems. ◇Problem description: The high salt content in the feed water, along with the inorganic precipitates formed by iron compounds, are the main causes of scaling in membrane separation systems. It is necessary to control this phenomenon in order to prevent deposits from forming on the surface of the reverse osmosis membranes and to avoid damage to those membranes due to increased pressure differences. ◇It provides strong protection against deposition. The Hypersperse MDC220 can be used with various water sources; Argo Scientific’s Hypersperse products combine phosphonates with dispersing polymers to prevent the deposition of hardness and iron oxide. ◇Requirements for handling and addition: 1. Addition point: To achieve maximum efficiency, Hypersperse MDC220 should be added before the mixer or safety filter ； 2. Please consult the local Argo Scientific sales representative to determine the dosing point and dosage appropriate for your specific system conditions; in some systems, specific dosing points and injection equipment are necessary. ◇Dosage amount: The required dosage amount must be determined based on the operating conditions of each individual system. An appropriate dosage amount should be calculated taking into account factors such as the salinity and temperature of the feed water, the recovery rate, and the type of reverse osmosis membrane. ◇The diluted Hypersperse MDC220 can be used either as is or after dilution. RO water or deionized water should be used for dilution, and the dilution ratio at room temperature should not exceed 10. ◇Packaging: The product is packaged in plastic drums of 25KG and 220KG.

But what’s the main component? Who knows?

Reply 1# 007393 it should be Han P