Formula for calculating the filtering area of a filter, emergency! !
Thread Content
Parameters: DN200; Maximum operating pressure: 140 Kpa; Density: 720 kg/m3; Medium: gasoline; Mesh size: 40; Flow rate: 74520 kg/hr
Please derive a calculation formula using the parameters above. I’m not very good at this, so I would appreciate it if the explanation were detailed. You can also send it to my email address: liuqishjx@sina.com. Thank you!!!!
When calculating the area, the filter is related to the concentration of pollutants as well as the capacity of the filter to hold contaminants, as determined by the manufacturer
Select 2 square bag filters； It’s just gasoline; it’s volatile and poses safety risks ； It is best to choose a fully automatic, enclosed filter with dry and wet discharge functions, which is entirely pneumatic to avoid sparks generated by electricity and ensure safety. But for the latter, a 15-square one should be chosen. Contact: wang*uhu007@163.com QQ; 191586689
You can contact our company, which specializes in the research and development of filtration products