The reason why the mixed bed cannot produce water
Thread Content
This post was last edited by cdpulin on 2010-6-17 12:48 What are the reasons why the mixed bed cannot produce water? ? ? ?
This post was last edited by cdpulin on 2010-6-17 12:49. If it has been running for a long time, it may be caused by resin clumping and needs to be regenerated.
Because I don’t know your process or the current situation of your on-site installation, I can only talk about the generality. There are many reasons for the water not coming out of the mixed bed. Jianyi inspection: (1) Whether the water inlet valve, pipe or pump is faulty ； (2) Whether the water outlet valve is faulty ； (3) Is the resin catcher blocked? ； (4) Whether the mixed bed outlet water back pressure is too high, that is, greater than the normal design pressure of the outlet water? ； (5) Find out whether the resin is contaminated. (6) Whether the water collector is blocked, etc.
I suggest: 1 Check for faulty valves, pipes or pumps. 2. Is the resin trap blocked? 3. Is the water collector blocked? 4 Check whether the back pressure is too high.