CS 3000 cannot be installed on HIS
Thread Content
This post was last edited by Hardmen on 2010-6-15 at 12:39. After making changes somewhere in the engineer station, it is installed offline on the operation station. There are no errors in the system view, indicating that the installation is complete. However, the system alarms on the operation station show the following errors: database download error from his0164 file=GSList.odb, database download error from his0164 file=GRList.odb, database download error from his0164 file=GR0021.grd… database download error from his0164 file=GR0001.grd. HIS0164* – engineer station. It is also worth considering whether it is a permission issue under the CENTUM user, but previous installations were carried out under the CENTUM user without any problems. Restarting the engineer station using Administrator also results in an alarm, preventing the installation from being completed. In short, the engineer station is fine after the modifications, and all changes are displayed properly. The C:\CS3000 folder in the engineer station is in a shared state. I wonder if anyone has encountered this situation and knows how to resolve it. Thank you!
1. The shortcuts for operating the station databases are still separate (GR00**); if they are separate, then each station needs to be modified. 2. If the database is damaged, that’s a bit troublesome. . .
Reply to 2# yjtop: Could you please be more detailed? I’m considering whether this error is caused by the fact that the previous modifications, for some reason, were not synchronized with the control station during saving, which prevented subsequent modifications from being uploaded to the control station. If that’s the case, then offline uploading will be necessary.
Offline installation is needed there; it’s so dangerous. O(∩_∩)O~ I agree with what was said in post 2; the key lies in how you make the settings. You can try this: delete the configuration file for the station from which you want to download the data on the engineer station. Then drag HIS0164 down, which means copying one, and then rename it. Lower garments next. There should be a synchronization command as well, right?
Reply to 4# Fatter: Do you mean to delete the operation station such as HIS0163, copy HIS0164, rename it to HIS0163, and then install it?
Is there really no way to solve this problem once it arises? The real reason has not been clearly explained so far. I still have to figure it out slowly on my own; there’s really no other way.
Agree with the second floor – it’s not synchronized; try installing it offline