There is a leak in the high-pressure water pipe; on-site treatment is required!
Thread Content
The high-pressure water pipe has a leak – is on-site treatment required? High water pressure means a leak as wide as a finger!
It is necessary to know what the water pressure and temperature are Laying method, working surface, etc.
Reply to 1# canyon: It would be great if there were a bypass at the leakage point, so as to equalize the pressure first and keep it within a safe range. Without a bypass, handling the situation is difficult, as changes in the high-pressure water pipes can affect the entire process; it is necessary to develop a thorough remedial plan, first installing a temporary water supply pipe before welding the leaky area.
Mark it as done temporarily; address it when there’s an opportunity to relieve the pressure.
Can welding be carried out? If possible, weld on a high-pressure valve made of the same or similar material to seal it off; if that’s not possible, clamps will have to be used instead.
It’s no big deal; we’re looking for a company that specializes in plugging leaks under pressure – we encounter this situation often.
If it can operate at low pressure and welding can be carried out, repair welding under pressure can be performed. If not, the only option is to use a punch card