Dark Horse SIS debugging software usage

Thread Content

Double-click ELOPII on the desktop or start/all programs/ElopII to start the software (a passcode is required to start the software). After starting the software, select the default option open project (open the project), click next, click finish to pop up the help window, and press close to close the help window. Select the PROJ project card in the left project bar and click on it. * * * _ Configuration project tree, right-click on the selected system unit and left-click ONLINE-Test (online test). The OLT tab will appear on the left side of the project bar. Double-click the main directory under the tab to open the debugging screen. Hardware inputs on the debugging screen are hard input points, Interlocks are logical points, and Modbus_Inputs is the communication input point, Modbus_outputs is the communication output point. Click the above button to open the test item. In the VAR below_Right-click on the EXTERNAL tab and select Define Filter. After clicking, enter the reference number in the blank column that appears and press Enter to search. Supported * No. and other wildcards, right-click on the searched position number and select Go to Occurrence. Click on the item that appears to enter the debugging screen for that point.