How to reduce vapor sticking to the kettle?
Thread Content
How to reduce vapor sticking to the reactor wall during production?
Anti-sticking coating for spray pans..............
Is what was said upstairs referring to Tu Fu? The coating cannot reach the areas above the spray valve; there are still dead corners on the top of the polymerization tank that cannot be coated.
The 130-model reactor in our plant allows spraying to take place through the central tube of the condenser located at the top of the reactor; the nozzles are situated at the top of the polymerization reactor, which enables limited spraying. Generally, nozzles are placed above the liquid level line, so it should not affect the so-called dead zones. High-pressure cleaning does have dead corners
There are only two ways: one is to improve the smoothness of the kettle, and the other is to enhance the coating effect on the kettle. After being in use for a period of time, the polymerization reactor can be considered for re-polishing. Of course, mechanical cleaning of the tank is not suitable; instead, ultra-high pressure water should be used for cleaning it. To improve the coating effect, first, use a high-quality coating agent; second, increase the coating temperature, as this facilitates the curing of the coating agent; third, select appropriate coating equipment to ensure an optimal coating effect with no dead spots.