Two deaerators operate in parallel
Thread Content
At present, my workshop is equipped with two 85 T/h high-temperature low-pressure membrane deaerators. The outlet pipelines for the deaerated water from these two deaerators are connected in a common header system. How can we ensure proper parallel operation of these two deaerators while maintaining effective deaeration?
The pressure difference with the operating deaerator should be no more than 0.0015 MPa, and the level difference with the water in the operating deaerator should be no more than 100 mm. The temperature difference with the water temperature of the deaerator in operation should not exceed 5 degrees.
It is necessary to install steam and water balance pipelines!