Thread Content
This post was last edited by adsl121 on 2010-8-1 07:54. Can purified water be used as water for replenishing in the coking tank?
This post was last edited by adsl121 on 2010-8-1 07:54. Isn’t it a bit of a waste?
This post was last edited by adsl121 on 2010-8-1 07:55. The purified water produced by the acidic water stripping unit can be used entirely as makeup water for the coking furnace, thereby saving energy and reducing consumption. It’s a shame if it isn’t discharged externally; some units do discharge it externally.
This post was last edited by Shandong Huaxing on 2010-8-2 at 10:26. Purified water has a wide range of uses; it’s just that some companies fail to recycle it. For the future of future generations, it’s better to save as much as possible! Desalination water for atmospheric and vacuum distillation, catalytic injection water, circulating water for power generation, coking cutting water, and so on. It would be even better if it could be used in farmland once the temperature drops and the chemical parameters meet the standards...
It can be fully reused; the cold coking water from coking can be used to replenish water in the coking tanks.
This post was last edited by Shandong Huaxing on 2010-8-2 at 10:28. It seems that we use purified water obtained from wastewater treatment here; the purified acid water is mainly reused in the production processes of various devices.
This post was last edited by Shandong Huaxing on 2010-8-2 at 10:26. There should be no problem; some designs include the use of reclaimed water for cooling coke water and water from coke cutting processes
This post was last edited by Shandong Huaxing on 2010-8-2 at 10:25. Absolutely possible! The purified water here is generally used as desalination water in atmospheric and vacuum distillation processes, as well as for coking cutting ; It is only discharged when it can no longer be used...
Absolutely. Our old plant even uses purified water instead of high-pressure steam for steaming, not to mention in the coke making tanks