Request a list of water-coal slurry gasification equipment at 6.5 Mpa

The Ferrovia slurry pump is recommended; for coal mills, brands such as Luomin and Shenchong are available

Recommend my wear-resistant ceramic valves!

Which company do you work for? I also have one with a 6.5 rating; we could exchange information. :)

There are only a few major equipment manufacturers and design institutes.: Tianchen gasifier: Haguo coal slurry pump: FLUWA Scrubber: Lanzhou Lanshi Xi'an nuclear equipment burner: Xi'an Xinli Rod Mill's Jiangyin Yate went bankrupt, you can ask for it yourself 1. List of technical parameters of main gasification equipment serial number equipment number equipment name unit quantity specification size 1 V6101A, B, C coal storage hopper table 3 concrete part: 6000×8000×15980 steel part: Specification: 2250×2250×2028 Design pressure MPa: Normal operating pressure MPa: Normal pressure design temperature℃: Normal working temperature: Normal temperature volume: 2.4 cubic meters equipment weight: 1360Kg Main pressure component materials: Q235-B＋0Cr18Ni9 2 V6103 Additive Tank 1 Specifications: 5600×9300 Design pressure MPa: The coil in the equipment is full of liquid 0.77 operating pressure MPa: Normal pressure 0.7 Design temperature℃: 60 185 operating temperature℃: 40 165 Material name: Lignin, sodium carbonate, low-pressure steam, condensate, main pressure component materials: Q235-B 0Cr18Ni9 full volume: 229 cubic meters equipment weight: 26200Kg heat transfer area: 5m2 3 V6104A,B,C Mill Discharge Chute Table 3 Specifications: 3400×3300 Design pressure MPa: Normal operating pressure MPa: Normal pressure design temperature℃: 100 operating temperature: 60-90 full volume: 36 cubic meters equipment weight: 7795Kg Main pressure component materials: Q235-B 4 V6105 Grinding sink table 1 Specifications: 3500×5000 Design pressure MPa: The coil in the equipment is full of liquid 0.77 operating pressure MPa: Normal pressure 0.7 Design temperature℃: 50 185 Operating temperature℃: Normal temperature 165 Material name: Grinding water vapor and water main pressure component materials: Q235-B 20 full volume: 48 cubic meters equipment weight: 10650Kg heat transfer area: 1.5m2 5 V6106A,B coal slurry tank 2 specifications: ￠8200×15120 Design pressure (jacket) MPa: 0.68 Operating pressure (jacket) MPa: 0.65 design temperature: 110℃ working temperature: 55-88℃ full volume (in equipment): 568 cubic meters inside the jacket: 6.5 cubic meters equipment weight: 162240Kg Main pressure component materials: 16MnR heat transfer area: 83.2m2 6 V6109 flushing sink 1 Specifications: ￠2900×3900 Design pressure MPa: Normal operating pressure MPa: Normal pressure design temperature: 70℃ working temperature: 49℃ (in the equipment), 165℃ (in the coil) full volume: 26 cubic meters equipment weight: 3780Kg Main pressure component materials: Q235-B 7 V6110 Low Pressure Nitrogen Storage Tank Station 1 Specifications: ￠1200×6485 Design pressureMPa: 0.68 operating pressure MPa: 0.5 design temperature: 50℃ working temperature: Full volume at room temperature: 5.6 cubic meters equipment weight: 2325Kg Main pressure component materials: Q235-B safety valve opening pressure: 0.68MPa 8 T6201A,B,C Scrubber Tower 3 Specifications: ￠3800×10950 Design pressureMPa: 7.16 Operating pressure MPa: 6.25 Design temperature℃: 280 working temperature℃: 250 full volume: 144 cubic meters equipment weight: 141840Kg Main pressure component materials: 13MnNiMoNbR＋00Cr17Ni14Mo2 9 R6201A,B,C gasification furnace table 3 specifications: ￠3200/3800×19214.4 Design pressure MPa: 7.15 Operating pressure MPa: 6.5 Design temperature℃: 425 (casing) operating temperature℃: 400 (gasification chamber shell) 230 (quenching chamber) gasification chamber volume: 25 cubic meters equipment weight: 346000Kg, of which the mass of refractory materials ~ 130000 Kg Main pressure component materials: gasification chamber: SA387 GR11 CL2 quench chamber: SA387 GR11 CL2+316L (surfacing) 10 V6201 Burner cooling water tank table 1 Specifications: ￠3000×4650 Material name: Desalted water design pressure MPa: Normal operating pressure MPa: Normal pressure design temperature: 80℃ working temperature: 49℃ full volume: 36 cubic meters equipment weight: 4735Kg Main pressure component materials: Q235-B 11 V6202A,B,C Burner nozzle cooling return water separation tank station 3 specifications: ￠500×2337 Design pressureMPa: 0.4 Operating pressure MPa: Normal pressure design temperature: 80℃ working temperature: 49℃ full volume: 0.277 cubic meters equipment weight: 370Kg Main pressure component materials: Q235-B 12 V6203 Accident burning nozzle cooling water tank unit 1 specifications: ￠2600×6529 Design pressureMPa: 0.65 operating pressureMPa: 0.45 design temperature: 75℃ working temperature: 43℃ full volume: 31.7 cubic meters equipment weight: 7500Kg Main pressure component materials: Q235-B safety valve opening pressure: 0.6MPa 13 V6204A～F Chilled water filter unit 6 specifications: ￠1200×4355 Design pressureMPa: 9 Operating pressure MPa: 7.2-8.1 Design temperature: 280℃ working temperature: 249℃ full volume: 4 cubic meters equipment weight: 10705Kg Main pressure component materials: 16MnR (normalizing) safety valve opening pressure: 9MPa 14 V6205A,B,C gasifier sealing water tank table 3 specifications: ￠500×1099 Design pressureMPa: Full water operating pressure MPa: Normal pressure design temperature: 100℃ working temperature: 100℃ full volume: 0.18 cubic meters equipment weight: 300Kg Main pressure component materials: Q235-B 15 V6207A,B,C lock bucket flushing water tank station 3 specifications: ￠2800×10000 Design pressure MPa: Full water operating pressure MPa: Normal pressure design temperature: 100℃ working temperature: 45-74℃ full volume: 56 cubic meters equipment weight: 10805Kg Main pressure component materials: Q235-B 16 V6208A,B,C Lock bucket table 3 media: Design pressure of vaporized slag and black water: 7.4 MPa operating pressure: Normal pressure--6.68MPa design temperature: 290℃ working temperature: 48-150℃ full volume: 23.5 cubic meters of main pressure component materials: 16MnR/16MnIV (surfacing SS) Equipment weight: 47575 (including stainless steel 2695) Kg 17 V6211A,B high pressure nitrogen storage tank 2 specifications: ￠1000×25271 Design pressureMPa: 15 operating pressureMPa: 12-15 Design temperature: 70℃ working temperature: 40℃ full volume: 18.4 cubic meters equipment weight: 39575Kg Main pressure component materials: 16MnR (normalizing) safety valve opening pressure: 15MPa 18 E6201 Burner cooling water cooler station 1 Specifications: Ф800×7448 Heat exchange form: BEU shell side tube side material name circulating cooling water burner cooling water heat exchanger number of passes: 1 4 Design pressureMPa: 0.7 3.0 Operating pressure MPa: 0.45 2.5/2.1 Design temperature℃: 55 60 Operating temperature℃: 32/42 49/43 Main material Q235-B 16MnR/20 Heat transfer area m2: 255 Equipment weight: 6790Kg 19 X6207A,B,C Venturi scrubber table 3 Design pressure MPa: 7.2 Operating pressure MPa: 6.4 Design temperature: 285℃ working temperature: 248℃ full volume: 2.83 cubic meters equipment weight: 9934Kg Main pressure component materials: 16MnR＋00Cr17Ni14Mo2 cylinder￠622×（32＋4）L＝300 16MnR（normalizing）＋00Cr17Ni14Mo2 cylinder￠610×（26＋4）L＝2633 16MnR＋00Cr17Ni14Mo2 Cylinder￠813×（32+4）L＝2000 16MnR (normalizing)＋00Cr17Ni14Mo2 20 V6301ABC High Pressure Flash Tank Station 3 Specifications: ￠3200×15065 Design pressureMPa: 1.25/-0.1 operating pressureMPa: 0.9 design temperature: 230℃ working temperature: 179℃ full volume: 75.3 cubic meters equipment weight: 29275Kg Main pressure component materials: 16MnR+00Cr17Ni14Mo2 safety valve opening pressure: 1.25MPa 21 V6302ABC High Pressure Flash Separator Station 3 Specifications: ￠2200×6416 Design pressureMPa: -0.1/1.25 operating pressure MPa: 0.837 design temperature: 160℃ working temperature: 120℃ full volume: 21.3 cubic meters equipment weight: 6965Kg Main pressure component materials: 16MnR safety valve opening pressure: 1.25MPa 22 V6303ABC Low Pressure Flash Tank Station 3 Specifications: ￠3200×10537 Design pressureMPa: 0.5/-0.1 operating pressure MPa: 0.051 design temperature: 162℃ working temperature: 112℃ full volume: 64 cubic meters equipment weight: 18640 (including stainless steel 2256) Kg main pressure component material: 16MnR+00Cr17No14Mo2 safety valve opening pressure: 0. 5MPa 23 V6304ABC Vacuum Flash Tank Station 3 Specifications: ￠3600×27414 Design pressureMPa: -0.1/ 0.4 operating pressureMPa: -0.07(upper)/-0.0914(lower) design temperature: 160℃ working temperature: 70 (upper)/45 (lower) ℃ full volume: 203 cubic meters equipment weight: 68335Kg Main pressure component materials: 16MnR 00Cr17No14Mo2 safety valve opening pressure: 0. 4MPa 24 V6305ABC First Vacuum Flash Separator Station 3 Specifications: ￠1200×4591 Design pressureMPa: -0.1/0.4 operating pressure MPa: -0.074 design temperature: 160℃ working temperature: 41℃ full volume: 3.9 cubic meters equipment weight: 2425Kg Main pressure component materials: Q235-B safety valve opening pressure: 0. 4MPa 25 V6307ABC Second Vacuum Flash Separator Stage 3 Specifications: ￠2000×6095 Design pressure MPa: 0.4/-0.1 operating pressureMPa: -0.093 design temperature: 60℃ working temperature: 43℃ full volume: 12.9 cubic meters equipment weight: 5670Kg Main pressure component materials: Q235-B safety valve opening pressure: 0. 4MPa 26 V6311 gray sink 1 Specifications: ￠10500×9178 Design pressureMPa: Full liquid operating pressure MPa: Normal pressure design temperature: 100℃ working temperature: 45℃ full volume: Equipment weight 649 cubic meters: 45395Kg tank material: Q235-B 27 V6314A,B Flocculant tank 2 specifications: ￠2000×2746 Design pressureMPa: 0.026 operating pressure MPa: Normal pressure design temperature: 60℃ working temperature: Full volume at room temperature: 8.14 cubic meters equipment weight: 1830 (including stainless steel 1440) Kg main pressure component material: 0Cr18Ni9 28 V6315 Dispersant Tank 1 Specifications: ￠1600×2200 Design pressureMPa: Normal operating pressure MPa: Normal pressure design temperature: 25℃ working temperature: Full volume at room temperature: 4.4 cubic meters equipment weight: 1330Kg tank material: 0Cr18Ni9 29 E6301A,B,C Gray Water Heater Station 3 Specifications: Ф1400×(46+4)×11360 heat exchange form: BIU shell side tube side material name flash steam, condensate high pressure gray water heat exchanger number of stages: 1 4 Design pressureMPa: 1.3 8.8 Operating pressure MPa: 0.9 7.9 Design temperature℃: 190 190 Operating temperature℃: 179.3/173.7 109/173 Main material 16MnR 16MnR normalizing/20MnMoⅢS31803 Heat transfer area m2: 1134 Equipment weight: 31035 (SS: 18275) Kg 30 E6302A,B,C High Pressure Flash Final Cooler Station 3 Specifications: Ф1200×14×5819 heat exchange form: BES shell side tube side material name circulating water flash steam, condensate heat exchanger number of passes: 1 2 Design pressure MPa: 0.75 1.3 Operating pressure MPa: 0.4 0.9 Design temperature℃: 60 200 Operating temperature℃: 32/42 179.3/135-110 Main material Q235-B Q235-B/0Cr18Ni9 Heat transfer area m2: 255.2 Equipment weight: 10640Kg 31 E6304 Wastewater Cooler Station 1 Specifications: Ф1200×12×7669 Heat exchange form: BEM shell side tube side material name circulating water wastewater heat exchanger number of passes: 1 8 Design pressureMPa: 0.7 1.0 Operating pressure MPa: 0.4 0.6 Design temperature℃: 50 60 Operating temperature℃: 32/40 50/40 Main material Q235-B Q235-B/20 Heat transfer area m2: 457 Equipment weight: 13590Kg 32 E6306A,B,C First Vacuum Condenser Station 3 Specifications: ￠1400×7691 Heat exchange form: BIU shell side tube side material name flash steam, condensate circulating water heat exchanger number of stages: 1 2 Design pressure MPa: 0.4/-0.1 0.7 Operating pressure MPa: -0.0703 0.4 Design temperature℃: 95 70 Operating temperature (in/out)℃: 70/41 32/41 Main material Q235-B Q235-B/20 Heat transfer area m2: 528 Equipment weight: 14940Kg 33 E6307A,B,C Second vacuum condenser stage 3 Ф2000×16×8991 Heat exchange form: BIU shell side tube side material name flash steam, condensate circulating water heat exchanger number of stages: 1 2 Design pressure MPa: 0.4/-0.1 0.7 Operating pressure MPa: -0.0904 0.4 Design temperature℃: 75 70 Operating temperature (in/out)℃: 44.9/40 32/40 Main material 16MnR 16MnR/16Mn Heat transfer area m2: 1584 Equipment weight: 38335Kg 34 E6308 Start-up Cooler Table 1 Specifications: Ф1200×14×9073 heat exchange form: BIU shell side tube side material name circulating water black water heat exchanger number of passes: 1 4 Design pressureMPa: 0.8 7.2 Operating pressure MPa: 0.55 2.786 Design temperature℃: 80 260 Operating temperature℃: 32/42 205.6/65 Main material 16MnR 15CrMoR Heat transfer area m2: 574 Equipment weight: 21700Kg 35 P6101A～F Coal mill discharge trough pump platform 6 reciprocating hydraulic diaphragm pump model: 3D70-MF87/1.0-BY-IA rated flow: Q=87m3/h rated pressure: P=1.4MPa pump speed: n=49min-1 piston diameter: 265mm stroke length: 200mm liquid cylinder form: The main materials of the three-cylinder single-acting flow part: Cylinder: ZG2Cr13 ； Valve seat: CrWMn ； Valve: Wear-resistant rubber + CrWMn; Frequency conversion motor model: YPT315S-6; Rated power: 75kW. Cylindrical reducer model: ZLY355-20; Gear ratio: i=20, two-stage reduction. Imported buffer model: KZ-100/0.5-I; Capacity: 100 liters; Material: Carbon steel. Exported buffer model: CKQ-50/2.0-I; Capacity: 50 liters; Material: Carbon steel. Frequency converter: Power of 90KW; Models: 36 P6102A~C. Additive pump: 3 units; Model: 65SDY-25; Transport medium: Additive (lignosulfonate); Rated flow rate: 4.2 m3/h. Inlet pressure: Atmospheric pressure; Outlet pressure: 0.5 MPa(G). 37 P6103A,B,C: Slurry feed pumps – 3 units; Minimum flow rate: 34 m3/h; Normal flow rate: 73 m3/h; Maximum flow rate: 95 m3/h. Inlet pressure: 0.01–0.015 MpaG; Operating pressure: 9.6 MPaG; Shaft power: 115 – 317 kW; Motor installation power: 355 kW; Motor speed: 536 – 1500 rpm; Pump speed: 17 – 47 strokes per minute; Stroke length: 400 mm (piston stroke); Number of pump heads: 3. 38 P6104A,B,C: Coal grinding feed pumps – 3 units; Model: SAJZ150-125-400A; Transport medium: Wastewater containing solids; Normal flow rate: 86 m3/h ； Rated capacity: 129; Inlet pressure MPa(G): Atmospheric pressure; Head: 50 m; Effective net positive suction head: 5.5 m; Shaft power kW: 29.28; Main materials: Pump body material: CS+Ni-Hard; Impeller material: Ni-Hard; Shaft: 2Cr13, 39 P6105A,B. Number of wash water pumps: 2; Model: SZA80-400C; Medium transported: Wash water; Rated flow rate m3/h: 90; Inlet pressure MPa(G): Atmospheric pressure; Head: 130 m; Shaft power kW: 66.38; Main materials: Pump casing: Cast steel; Impeller: Cast steel; Shaft: 2Cr13, 40 P6106. Number of additive underground tank pumps: 1; Model: 65SDY-25; Medium transported: Additive (lignosulfonate); Rated flow rate m3/h: 28; Inlet pressure MPa(G): Atmospheric pressure; Head: 25 m; Shaft power kW: 3.93; Main materials: Pump casing: ZG0Cr18Ni12Mo2Ti; Impeller: ZG0Cr18Ni12Mo2Ti; Shaft: 316, 41 P6107A,B. Number of grinding pool pumps: 3; Model: 100LJYA-40G; Medium transported: Solid-containing wastewater; Rated flow rate m3/h: 50; Inlet pressure MPa(G): Atmospheric pressure; Head: 40 m; Shaft power kW: 10.89; Main materials: Pump casing: Cr30; Impeller: Cr30; Shaft: 2Cr13, 42 C6101A,B. Number of emergency nitrogen compressors: 2; Model: 200－2DF－A4－NL; Total number of compressor crankshafts: 2; Number of cylinders: 3; Rated power: 97 kW; Displacement (dry/wet) Nm3/h: 550 (dry); Suction temperature: Normal 25°C, maximum 40°C; Exhaust temperature: 50°C; Suction pressure MPa(A): Normal 0.45, minimum 0.30; Exhaust pressure MPa(A): Normal 12.2, maximum 13.5, 43 W6101A,B,C. Number of coal weighing feeders: 3; Model: NJGC-30; Shell type: Cylindrical pressure-resistant shell; Shell thickness: 8 mm; Pressure resistance rating: 0.35 MPa; Measurement accuracy: ≤±0.5%; Control accuracy: ≤±0.1%; Transport capacity: 6.5–65 t/h; Coal feeding distance: 5480 mm, 44 M6101A,B,C. Number of coal grinders: 3; Coal grinder specifications: Φ3.8×5.8 m; Type of coal grinder: Rod mill; Normal feeding rate: 53 t/h (on a dry-basis basis for coal); Maximum feeding rate: 70 t/h (on a dry-basis basis for coal); Effective inner diameter × length: Φ3800×5800 mm; Effective volume of the cylinder: 65 m3; Cylinder lining: Rubber lining with a steel framework; Maximum amount of rods that can be used: 115 t; Specifications of the grinding rods: φ75, φ63, φ50; Cylinder rotation speed (constant speed): 13.8 r/min; Motor: YKK630-8; Power: 1250 KW; Voltage: 10000 V; Requirements for the discharged coal slurry: Solid concentration: Normal 62%, range 58–65%; Product particle size distribution: Standard sieve (wt% passing rate): 8-mesh (2380 microns) 100%, 14-mesh (1410 microns) 98–100%, 40-mesh (420 microns) 90–95%; Larger than 325 mesh:

Is there an Excel file available? If you have one, could you send it to me? dan_yu@hotmail.com. I have a detailed equipment list and budget for a SHELL plant with a capacity of 3,000 tons of coal per day, and I’m willing to exchange it for a detailed equipment list for a GE plant of similar scale (2,000–3,000 tons) with a pressure of 6.5 MPA.

The MY type centrifugal low-pressure water-coal slurry pump produced by Shanghai No.1 Water Pump Factory Co., Ltd. is recommended