How are the equipment supports on the stainless steel square tube steel platform connected to the square tube beams?
Thread Content
For the steel platform in a clean room, the client requires that stainless steel rectangular tubes be used. There are equipment on this platform, weighing around 3 tons. I’m not sure how to bolt together the legs of this equipment and the beams
For the owner’s question, bolts can be used for connection!
When using bolts, does it mean drilling through the square steel tube for pulling forces? Otherwise, the length of these bolts will also need to be increased. By the way, do we need to provide the fixing bolts for the equipment to the supplier for them to manufacture? It seems that they’re generally provided by* the suppliers~~ Reply 2# weiyf1951
OP, steel supports can also be designed at the square steel beams, and then connected using bolts.
What was said on the 4th floor is correct; a saddle can be designed at the square steel beam, and then bolted in place.
What was said on the 4th floor is correct; a saddle can be designed at the square steel beam, and then bolted in place.
Steel supports can be made of stainless steel.