fillet weld
Thread Content
In spherical tanks, what is the difference between the root thickness of a fillet weld, the thickness of the fillet weld itself, and the height of the fillet weld? Thank you! !
I also want to know and hope for some expert advice
If a fillet weld is considered as a right triangle, the height of the weld leg corresponds to the length of one of the right angles, while the thickness of the weld angle, also known as the height of the legs, corresponds to the length of the hypotenuse
Weld leg----------In the cross-section of a fillet weld, it is the minimum distance from the weld toe on one right-angled surface to the surface of the other right-angled surface. Fillet weld-----A weld that is created along the line where two perpendicular or nearly perpendicular parts meet. Face fillet weld ---- A fillet weld whose weld axis is perpendicular to the direction of stress in the welded parts. Side fillet weld ---- A fillet weld whose weld axis is parallel to the direction of stress in the welded parts. Parallel intermittent fillet welds----Intermittent fillet welds that are symmetrically arranged on both sides of a T-joint and have roughly equal lengths. Interlaced intermittent fillet welds – intermittent fillet welds that are arranged alternately on both sides of a T-joint, with lengths that are roughly equal. Convex fillet weld ---- A fillet weld whose surface is raised. Recessed fillet weld – a fillet weld whose surface is recessed.
Reply to 4# china7_phz: The solder joints aren’t very clear to see, are they? ? It would be great to have an illustration~!