Reasons for excessive catalyst unit consumption in the heavy catalyst unit
Thread Content
The catalyst unit consumption of the catalytic device in our factory is as high as about 3.0. Is it because the catalyst loss is too large or the catalyst itself has poor performance? Please help analyze it.
1. The spin separation effect is not good. 2. The quality of the catalyst is not good and it is easy to break and produce fine powder. 3. You can check whether there is more catalyst in the flue gas or the oil slurry and then judge where it escapes from.
Lou Zhu didn’t explain it carefully enough and many things were unclear! First of all, what is the reason for your high catalyst consumption? Is it necessary to remove the agent for heavy metal poisoning? Isn’t it easy to run away from the whirlwind? Does the oil slurry have high solid content? Or the external heater broke and the catalyst was crushed and ran away? Or is it the catalyst itself? First find out what disease is best to treat!
Reasons 1. The quality of the catalyst itself. 2. The cyclone is in poor working condition and the separation efficiency is low. 3. The catalyst is worn and damaged due to collision in the two devices. 4. The catalyst and water or steam thermally collapse to produce fine powder.