Regarding the diameter of the pipes for flue gas transfer
Thread Content
If the volumetric flow rate of the flue gas is very high, does that mean the diameter of the pipeline used for transportation needs to be large, even 1 or 2 meters in diameter, or should it be transported through multiple pipelines?
If the volumetric flow rate of the flue gas is high, the pipe diameter needs to be designed by considering the pressure of the flue gas, and then the gas flow velocity can be determined using relevant standards. If the pressure is very low, large pipe diameters are acceptable; pipe diameters of 1 or 2 meters, or 1.5 meters, are often used. Whether there should be branches should be decided again based on the actual circumstances.