The reduction furnace has been pressurized to 20 kilograms
Thread Content
The operating pressure of our company’s reduction furnace has reached nearly 2 MPaG, and the deposition time is only 40 hours, which **reduces the production time significantly; 60 kilograms of polysilicon can be deposited per hour. The power consumption was reduced to 50 kWh.
Is it that good? Cows! A batch is grown in 40 hours – what fast speed! 20 kilograms falls under the category of high-pressure containers, which is quite dangerous.
Haha, the bolder one is, the more they produce.
2MPa, classified as a medium-pressure vessel
I don’t believe it! For now, it’s also impossible!
High pressure does not mean a high production rate. As you said, I really suggest that you quit right away~ Brother~
Don’t worry, it’s operating normally; in fact, a working pressure of 2 MPa isn’t considered very high in ordinary chemical plants. This can also be considered a trend in the development of polysilicon.
Is it really true? Theoretically, it seems feasible, but in actual production, a cautious attitude is adopted... Looking forward to further developments
They’re going all out again; I’m not sure about the design of your reduction furnace, so it’s hard to tell.
;A pressure of P20KG? That’s completely absurd