High efficiency coal water slurry equipment
Thread Content
This post was last edited by wjian on 2010-8-23 22:02 A new type of coal-water slurry grinding equipment can control the power consumption of pulping per ton of pulp within 20kw. Moreover, the structure is simple, reliable, and easy to operate. It has passed the test in Bayi coal-water slurry plant. Interested netizens should write to 81mk@163.com.
Can you be more specific? What technology is used?
The author will briefly introduce the principle and general equipment composition of this coal grinder so that everyone can have a rough understanding. In addition, it seems that the current power consumption per ton of coal mill is just over 20KW. According to the original poster, the difference does not seem to be very big. Unless the performance of a new type of equipment is very advanced or the operating energy consumption is very low, the attractiveness is not obvious.
This post was last edited by wjian on 2010-8-23 22:20 The power consumption per ton of slurry refers to the total power consumption of the production line, the entire process from lump coal crushing to finished coal-water slurry, not the energy consumption of the coal mill. The core equipment is based on the working principle of the stirred mill of the American UP Company. (You can search for it) Features: 1. The equipment saves more than 60% in energy consumption compared with ordinary roller mills. 2. Land saving: It occupies a small area and the civil construction cost is * * It can be reduced by more than 500,000 yuan. 3. Process simplification: Through special design, the subsequent filter and reinforced pump of the drum ball mill can be omitted, saving more than 200,000 yuan. 4. Low noise: Its working noise is more than 20% lower than that of a drum mill, and it is more in line with environmental protection requirements. 5. Easy maintenance: The main components of the equipment are imported from the United States and are durable. 6. The process is adjustable: By adjusting the process parameters, it can adapt to the needs of different coal-water slurry plants. The existing technology uses a rod mill and a fine grinder to make pulp, which is a complicated process. This equipment can be used alone to make pulp, and the particle size meets user requirements. The particle size gradation can be adjusted by adjusting the mill components. If you need technical discussions and exchanges, you can contact the host. Wang Jian, Production Technology Department, Bayi Coal Water Slurry Plant 13869444481