About the vibrator of the silo
Thread Content
This post was last edited by Black Gold on 2010-8-29 07:45. The filter cake in the silo is often bridged, and it is necessary to manually hit the hopper wall with a hammer before removing the material. Can a vibration motor be used instead of manual work? How to install?
The effect of vibration motor is generally not good, and it is easy to break. See if you can consider compressed air clearance.
personal opinion: Pellet material can be vibrated ； Fine materials can be air-exploded ； The filter cake can be conveyed.
Our factory's motor ballast is also ineffective, and the motor is often easily damaged.
Beat it with an electromagnetic or air hammer, no problem
Our vibration motors all operate in a jog mode. If they are not run for a long time, they will easily burn out.
Reply 4# daluobo10086110 Sometimes the effect of external tapping is not ideal. This needs to be dealt with on a case-by-case basis. We don't know your actual industry and mining, so we can only give you advice based on routine. You'd better take a photo and see. That would be more precise.
There are many reasons for the poor discharge of material from the silo bridge. First, analyze the material characteristics, and then analyze the process. Various vibrators such as air hammers have their own limitations and are not easy to use in all situations. Generally, wet materials, sticky materials, or thin materials are relatively troublesome. The Vibra-jet bin unloader from Dynamic Air Company of the United States is more useful than other current methods. Interested friends can contact me jeff.chen@dynamicair.com