Criticized by thunder
Thread Content
Due to lightning outside, an erroneous signal caused the burner cooling water to be turned off by mistake. This was a chain shutdown of the gasifier. In fact, the valve was not closed. How is your gasifier protected from lightning?
When designing for electrical professionals, lightning protection measures such as lightning rods can be taken
In this case, the signal should be interfered. The three-choice two interlock of the burner cooling water shut-off valve on our ESD is missing. We are not afraid of this interference.
I have seen a gasification device. All equipment in the entire frame has grounding wires to prevent lightning strikes.
The entire frame seems to be integrated with the steel frame, which is connected to the ground. Hahaha
It’s really not the case. Part of it is a steel structure frame, and part of it is made of reinforced concrete, so some equipment cannot be grounded.
The fifth floor should be talking about the device that was struck by lightning.