What kind of flow meter is best for boiler flue gas flow?
Thread Content
I am new to thermoelectrics, please give me some advice.
It is recommended that it is better to use the most original differential pressure type flow meter. The reference data is more complete.
If the differential pressure type has a large diameter, ANNUBAR is recommended.
Thermal mass flowmeter can be used when the temperature is below 300 degrees. Differential pressure is also possible, but it needs to be compensated.
Design regulations for automatic control of circular orifice plate of differential pressure flow meter throttling device - P56
As 2L said, differential pressure flow meters are more commonly used.
What is the pipe diameter? If it is less than 4500mm, it is best to use an Annubar or Deltabar flowmeter. For large pipe diameters, it is recommended to use a cross-section flowmeter. Anyway, the differential pressure type is most suitable.
Hello, our company's butterfly flowmeter is very suitable for use in flue gas, non-instrument wind, boiler feed water steam outlet and other media with slight impurities. If you are interested ++QQ I will give you the information. Thank you QQ1325289037
For flue gas flow meters in CEMS systems, it is recommended to use V series Verabar flow meters. http://www.shakic.com/cp/product13.htm Or SHQL series thermal gas mass flow meter http://www.shakic.com/cp/product3.htm The latest technology is the use of insertion gas ultrasonic flow meters http://www.shakic.com/cp/product4.htm
Reply 10# KUIK How can an ultrasonic flowmeter be used for unclean gas?