How to conduct an explosion test using an explosive cartridge?
Thread Content
How to conduct an explosion test using an explosive cartridge? Urgently needed. Thank you, colleagues! ! ! ! :victory:
Reply to 1# lvlinbaobao: Are there any technical requirements for the explosion tube? ?
When taking a gas sample, hold the ring handle, remove the lid, open the valve, and drive the gas from the cylinder out through the exhaust pipe； Once the cylinder is completely filled with gas, close the stopcock, remove the sampling port, and quickly cover it ； Go to a safe place (this is very important); light a match, remove the lid, and ignite the gas inside the cylinder from the bottom. If it won’t light up, it indicates that there is too much air in the gas pipeline and equipment ； If a detonation occurs upon ignition, it indicates that an explosive concentration has been reached in the gas pipeline or equipment, and the gas is an explosive mixture ； If it burns all the way to the top of the test tube after being ignited, it indicates that the gas in the gas pipeline and equipment is of satisfactory quality. Such explosion tests need to be conducted at least 3 times with successful results in order to prove that the gas inside the gas equipment is pure.
Reply to 3# Little Pig is also smart; study hard* and keep making progress every day! !