Steps or guidelines for unloading the Klaus catalyst
Thread Content
Who can provide the steps or guidelines for unloading a Klaus catalyst? Thank you!
We usually outsource it to labor agencies. There’s no specific plan, but it seems pretty easy to carry out in practice. First, open the upper manhole and manually load the bags and carry them away slowly. Of course, it is necessary to conduct laboratory tests and ensure they are successful before entering the reactor. After unloading to a certain extent, open the lower manhole. It is also possible to manually sew a long woven bag and load it directly onto the vehicle, but this method will generate some dust.
Before doing this, the catalyst should first be slowly oxidized; it can only be proceeded with after passivation is complete. Active participation
Today’s reactors are usually located at high elevations, making loading and unloading difficult. Special long inclined chutes can generally be constructed to allow materials to flow from the platform entrance down to the ground for direct bagging or loading onto vehicles.