May I ask: for a 0.8MPA full low-temperature variation system, what are the design pressure and design temperature for the heat exchanger and the saturated hot water tower?
Thread Content
What are the technical specifications of these two devices?
For the 0.8MPa full low-pressure shift unit, the design pressure of its equipment is approximately 1.0MPa. For our 0.8MPa medium-low-pressure shift unit, the design pressure of the medium and low-pressure shift reactors is 0.98MPa, while the low-pressure shift reactor is equipped with internal insulation; its design temperature is 350°C (taking into account the heating and sulfidation of the low-pressure shift catalyst). The design temperature of the saturated hot water tower is 180°C.