Synthetic water cooler
Thread Content
How to monitor for leaks in the water cooler (shell-and-tube heat exchanger) of a Ruchi-type methanol synthesis tower. Observe the amount of leakage; water flows in the shell side while methanol flows in the tube side. There is a gauge tube at the bend in the outlet pipeline, from which air is discharged
The temperature after water cooling, as well as the temperature of the return water in the circulation system, are monitored at 8–10 specific points in the upper and middle sections of the methanol water cooler; by recording these values, it is possible to determine whether there is any leakage
Water cooling – circulating water return temperature! How to observe! There are fluctuations! It’s not obvious that there’s a leak either! Maybe the heat exchange effect is not good! What does fixed-point monitoring from 8 to 10 o’clock mean? I think so! Open the gauge tube above to release air! Every half an hour! Judge based on the exhaust conditions! I think the leak won’t be that big! Otherwise, just spray it into the water without a filter! At most, it’s just a slight leak! ! ! It doesn’t affect anything!