Seeking advice on anti-static grounding in corrosive environments
Thread Content
I recently encountered a project in which the environment is subject to acidic corrosion; it involves a four-story steel structure building. What material would be suitable for use in anti-static grounding? In normal environments, 25X4 flat steel was used in the past, but this option is not feasible due to the conditions here. I would appreciate some advice from those with experience in this area. Thank you!
In environments with corrosive gases, galvanized flat steel can also be used for static grounding; however, an additional anti-corrosion measure is required. This usually involves painting the galvanized flat steel. Regular inspections are also necessary – if the paint starts to peel off, it should be repainted promptly, and if the steel becomes corroded, it should be replaced or repaired as soon as possible.