Pressure: 80 kilograms, flow rate: 8 cubic meters per hour, medium: water, temperature: room temperature
Thread Content
Pressure: 80 kilograms, flow rate: 8 cubic meters per hour, medium: water, temperature: room temperature, continuous operation. Does anyone among you know of a pump that can meet these specifications? ? ? ?
I checked the power requirements for you. If a positive displacement pump is used, a 30 kW motor will be sufficient; whereas if a centrifugal pump is used, a 45 kW motor would likely be needed. However, I recommend that you consult the manufacturer of the water pumps, as they will be able to select the most suitable pump based on your process requirements
What’s the use? A high-pressure pump can be used.
The pressure is high while the flow rate is relatively low; it is recommended to use a positive displacement pump – consult a pump manufacturer for this.
High-speed pumps can be considered; they offer stable performance with no fluctuations in pressure.
Reply 1# oufukeji metering pump； Plunger pump ； Diaphragm pumps are all suitable.
It depends on the medium being transported and the operating conditions; if stability of the medium is not required, piston pumps or diaphragm pumps (i.e., positive-displacement pumps) can be chosen
Based on the parameters, a high-speed centrifugal pump is selected. Domestic high-speed pumps are produced by Zhejiang Tiande and Beijing Institute 11.
This post was last edited by 879835994 on 2010-11-4 20:19. You can choose pumps from the 11 manufacturers in Beijing; there, you can find any pump you desire, which can be designed and manufactured according to your requirements! If needed, I can provide you with the phone number
Reply to 1# oufukeji: Based on the owner’s requirements regarding pressure and flow rate, a “three-plunger pump” generally meets these needs. You can simply contact such pump manufacturers to select the appropriate model.
Reply to 1# oufukeji: That’s right; such pressure is generally met by \"high-pressure reciprocating pumps\".