What is the typical exhaust temperature of a heat transfer oil furnace?
Thread Content
Today, while using the software for Hang pot to calculate the heat transfer oil furnace, the flue gas temperature was 320 degrees. My colleague said that this was incorrect and that it should be around 400 degrees. The inlet oil temperature is 280°, and the outlet oil temperature is 300°
Who can provide a summary table for the YLW9500?
What is important is to ensure the full utilization of fuel at a stable operating temperature; excessively high exhaust temperatures not only indicate low fuel efficiency, but large-scale boilers also need to take into account the issue of dew point corrosion above 200 degrees Celsius.
I’m talking about the outlet temperature of the heat transfer oil furnace, which is definitely higher than the inlet temperature of the oil!
Reply to 5# hjc404: It is generally around 60°C higher than the oil supply temperature; if there are many heating surfaces installed, it can be a bit lower
YLW9500？ ? 8 million kcal, right? I have the YLW9300 here
Hangzhou Boiler’s calculation software? I’m quite curious; I haven’t seen many calculation software programs before, and I really want to take a look at them
I’m not sure about that software for Hangzhou boilers; are you in the boiler business?
There is a crypto dongle, so it’s not available on the market. It seems to be 10,000 yuan per set!
That software isn’t as accurate as what I can calculate with Excel!