Pipeline diameter calculation
Thread Content
This post was last edited by WSL01218 on 2010-10-18 at 12:08; the pressure is 0. For steam at 5 MPA with a flow rate of 180 M3/H, how is the pipeline diameter calculated?
0. For steam at 5 MPA, with a flow velocity of 20 m/s, the diameter comes out to be 56 mm; please round it off a bit.
For saturated steam at a pressure of less than 1 MPa, with a flow velocity in the range of 15–20 m/s, using the lower limit of 15 m/s, the calculated pipe diameter is 65 mm; a seamless pipe of 76*4 can be used for this purpose