Oil is being pumped to the raw material tank for operation – what could be the reason it can’t get in?
Thread Content
Oil is being pumped to the raw material tank for operation – what could be the reason it can’t get in? Please have an expert analyze it! Thank you first!
First, check whether the process is unobstructed, and then see if the pressure in the crude oil tank is too high, resulting in insufficient head pressure for sulfidation.
Is there a pressure balance valve or something similar on the top of the raw material tank that isn’t open?
Check the procedure to see if the blind flange has been removed
To check the process, it must be streamlined first. Check if there is a problem with the pump.
The key is to check the process, the areas that have been modified, and the equipment pressure; there should be no major problems
1. Is the process smooth? 2. Is the power equipment functioning properly? 3. Is the pressure in the raw material tank normal? Let’s check these three first to see if there are any other issues.
It’s been resolved; it was caused by insufficient pressure!
It’s too simplistic of a question! !