Drawings of non-standard wire mesh demisters
Thread Content
When I was working on a piece of equipment, there was a wire mesh demister under the pipe inlet, with a DN200 size. I’ve never done this before; I hope someone can provide drawings of a non-standard wire mesh demister. I am extremely grateful. Send it to my email 425282118@qq.com
Just make a frame and put some mesh inside it!
What was said upstairs is correct; this task is relatively easy – I have done it before. However, the mesh needs to be carefully selected; the number of mesh points required depends on the requirements of your manufacturing process. It is recommended to use multiple layers of mesh laid in a staggered pattern, with appropriate structures designed at both the top and bottom of the mesh to compress and secure it. (At the inlet and outlet of the device, a ring-shaped structure is generally used; it is recommended to add several compression strips in the middle of the ring.) The selection of wire mesh can be found in mechanical design manuals.
May I ask which volume of the mechanical design manual to look for?