Diesel ignition conditions for boilers
Thread Content
I need to create a DCS display showing what conditions must be met for diesel ignition of the boiler. Thanks
Check the boiler design manual; it’s there!
The fan rotating, the oil pump operating, the ignition transformer functioning, and the flame detector – displaying these on a screen is sufficient
The last edit to this post was made by dongjiang1001 on 2011-7-1 at 11:51. Diesel ignition conditions for coal powder boilers: 1) The opening and closing circuits of the fuel cut-off valve have been installed and calibrated; the oil pipelines have been checked for integrity and passed the tests； 2) The fuel section of the FSSS system (Furnace Safety Monitoring System) has been calibrated and is ready for use; the associated DAS system can also be operated properly, allowing for normal monitoring and control via the DCS in the control room ； 3) The boiler combustion chamber has been purged, with no combustible materials remaining ； 4) The ignition gun’s movement forward and backward, as well as the trial ignition test, were successful ； 5) All auxiliary machines have passed the trial operation ； 6) The drum water level is at the lowest level.