Anti-corrosion treatment for the inner wall of the additive tank
Thread Content
How to prevent corrosion on the inner wall of the additive tank? Please ask experienced colleagues to explain in detail the anti-corrosion process
Reply to 1# nmexbzf: Use fiberglass epoxy resin for anti-corrosion purposes on the inner walls of the tank. The bottom of the tank is heated by steam coils, with the temperature usually around 50-60 degrees. However, if the temperature exceeds 60 degrees for an extended period, the additives or solvents contained in the epoxy resin will inevitably evaporate or decompose, which will lead to the peeling off of the anti-corrosion layer Please share any experience and suggestions regarding the anti-corrosion treatment of the inner walls of the additive tank and its use.
Reply to 1# nmexbzf: What is the design operating temperature for epoxy fiberglass equipment?