Seek RTO-related manufacturers

Continuing to wait for experts..........

The main companies in China that specialize in RTO technology include well-known firms such as Aiseler Coating and ACR Spraytech. The principle behind this technology is to heat organic waste gases to over 760 degrees Celsius, thereby causing the VOCs in those gases to be oxidized and decomposed into carbon dioxide and water. The high-temperature gas generated by oxidation flows through a specially designed ceramic heat storage element, causing the ceramic to heat up and thus \"store heat\"; this stored heat is then used to preheat the organic waste gases that follow.

If the exhaust gas contains CO, can it be treated with an RTO? ? ?

Reply to 1# zhju1985: Our company specializes in providing RTO equipment, and we have many successful projects to our credit. You can get in touch with me. By the way, what does \"50 KG/H\" refer to in terms of your waste gas volume? Is it the concentration, and of what substance?

Reply to 1# zhju1985: Are you from Taizhou? We have successful operations in Taizhou, with Zhejiang Haishen Pharmaceutical; it started testing this month

50kg/h should be the amount of volatile organic compounds emitted per hour, right?

You can contact me regarding RTO issues. I hope this can help you. You can send me an email at luby@gardenep.com or add me on QQ at 360081420

The amount of exhaust gas is too small, unless there’s a mistake in the figures!

Shanghai is where Da Huan Bao Jian Neng Equipment Co., Ltd. develops its regenerative thermal oxidizers (RTOs). These are high-efficiency devices for treating organic waste gases, created by the company through the integration of advanced foreign technologies along with its own innovative efforts. Compared with traditional catalytic combustion and direct-fired thermal oxidizers (TO), it features high thermal efficiency (≥95%), low operating costs, and the ability to handle large volumes of waste gas at low concentrations. When the concentration is slightly higher, secondary waste heat recovery can also be carried out, **reducing production and operation costs. The VOC removal rate of a conventional two-bed RTO is approximately 98%. By using our company’s patented gas-sealed lift valve in combination with a VOC catcher, the VOC removal rate for two beds can be increased to over 99%. Applicable process exhaust gases: ● Low concentration (below 30% LFL), high flow rate ● Exhaust gases containing various organic components, or those whose organic composition changes frequently ● Exhaust gases containing components that can poison catalysts or reduce their activity ● Not suitable for exhaust gases containing large amounts of silicone resin. Performance features ● Very high VOC removal efficiency. The equipment with two beds reaches over 98%, while that with three beds exceeds 99%. ● Ultra-low operating costs. When the VOC concentration reaches 450 ppm, no additional fuel consumption is required; if the VOC concentration is even higher, secondary waste heat recovery can be employed to **reduce production costs**. ● Heat efficiency as high as 95% ● No secondary pollutants such as NOx are generated ● Extremely wide range of air handling capacity: 5,000–200,000 cubic meters per hour ● Fully automatic control; easy to operate and maintain. Contact person: Manager Li. Phone numbers: 021-64708620, 13916711863

. . . . . . . . . . . . . . . . .