What flow meters can be used for naphtha
Thread Content
As the title suggests, is it okay for me to choose an electromagnetic option for naphtha?
The original poster is being funny, right? Naphtha is a light petroleum product that does not conduct electricity at all, so electromagnetic flowmeters cannot be used. If it is a trade handover, it is best to use a mass flow meter. For ordinary process metering, vortex flowmeters, orifice plates, or rotameters can all be used.
The E+H mass flow meter we use is very useful.
OP, naphtha cannot be measured using an electromagnetic flowmeter (its conductivity is too low). A volumetric flow meter (such as a rotameter or gear flow meter) or a mass flow meter should be used.
Use vortex flow meters; they are more cost-effective and practical
Naphtha is non-conductive, so electromagnetic flowmeters cannot be used; it is recommended to opt for gear-type positive displacement flowmeters, wedge flowmeters, or Coriolis mass flowmeters. http://www.shakic.com/cp/product5.htm http://www.shakic.com/cp/product6.htm http://www.shakic.com/cp/product9.htm
Thank you, I’ll choose the throttle device.
If the medium viscosity is available, an AK balanced flow meter with a double-flange design can be used
It’s actually better to choose a wedge flow meter – it offers a good cost-performance ratio and is reliable. If high measurement accuracy is required, then opt for a mass flow meter
Ultrasonic flowmeters can be used; it’s best to use external clamping type ones, as they are easier to install