Do any of you sea friends have the MSDS for liquid wax?

The only information found in the MSDS is liquid paraffin, also known as paraffin oil; its English name is liquid paraffin； Appearance and properties of paraffin oil: A transparent, colorless or pale yellow liquid. Main uses: Used in the production of surfactants, chlorinated paraffins, petroleum proteins, etc., as well as in the pharmaceutical industry. Other information: According to China’s petrochemical industry standards, paraffin wax is classified into two categories: heavy liquid paraffin wax and liquid paraffin wax. Heavy paraffin is available in two grades: first-class and qualified. Liquid paraffin is available in two grades: 1 and 2.

It belongs to solvent oil! It is estimated that there is no relevant MSDS!

Found online, but no heat of combustion or Material Safety Data Sheet (MSDS) available. Liquid paraffin. Part 1: Chemical and company identification. Chinese name of the chemical: Liquid paraffin. English name of the chemical: Paraffin liquid. Company name: Guangzhou Xingang Chemical Co., Ltd. Address: 1st floor, No. 274, Gongye Avenue Middle, Haizhu District, Guangzhou. Postal code: 510280. Email addresses: xg108@xg108.com; xghg2000@yahoo.com.cn. Fax number: (86)(020)(84314925). Emergency contact number for the company: (86)(020)(84307896). Technical data sheet code: Date of issuance: Year Month Day. Part 2: Composition/information on components. Pure substance ■ Mixed substance □. Name of the chemical: Liquid paraffin. Molecular formula of the chemical: Molecular weight:. Hazardous components: Content. CAS number: Liquid paraffin – 100%, 8012-95-1. Part 3: Overview of hazards. Hazard category: Routes of exposure: Inhalation, ingestion, dermal absorption. Health hazards: Environmental hazards: Fire and explosion risks: Section 4 – First aid measures. Skin contact: Immediately remove contaminated clothing and rinse with plenty of flowing water. Eye contact: Immediately lift the eyelids and rinse thoroughly with plenty of flowing water. Inhalation: Quickly move to a place with fresh air. Seek medical attention. Ingestion: Seek medical attention if discomfort occurs after ingesting a large amount. Part V: Fire-fighting measures. Hazardous properties: Flammable. Harmful combustion products: Carbon monoxide. Fire extinguishing methods and agents: dry powder, foam. Precautions for extinguishing fires: Section 6 – Emergency response to leaks. Personal protection: Do not inhale its vapors/foam. Environmental protection measures: Chemicals are not allowed to be discharged into the environment without treatment. Cleaning/absorption measures: Collect and recover the spill in a safe manner or transport it to a waste disposal site for treatment. Take further action to clean up the polluted area. Part 7: Handling, Disposal, and Storage. Handling precautions: Protect from light. Storage precautions: Seal tightly; no restrictions on storage temperature. Part 8: Exposure Control/Personal Protection Maximum Allowable Concentration: Monitoring Methods: Engineering Controls: Immediately replace contaminated clothing. Apply the skin care cream. Wash your face and hands after working. Do not inhale its vapor. Respiratory protection: Workers should wear hooded, powered air-purifying respirators with filters to protect against dust. Wear a self-contained breathing apparatus if necessary. Eye protection: Safety goggles should be worn when in contact with high concentrations. Body protection: Wear chemical protective clothing. Hand protection: Wear chemical-resistant gloves. Other protection: Section 9 – Physical and chemical properties. Appearance and characteristics: Liquid, colorless, odorless. pH value: No data available. Dynamic viscosity: ~ 110–230 mPa·s (20 °C). Melting point (°C): No data available. Boiling point (°C): 300–500. Flash point (°C): ~ 230. Upper explosive limit (% V/V): No data available. Density: ~ 0.84–0.89 g/cm³ (20 °C). Relative vapor density (air = 1). Ignition temperature (°C): No data available. Lower explosive limit (% V/V): No data available. Heat of combustion (kJ/mol): Saturated vapor pressure (hPa): < 0.0001 (20 °C). Critical temperature (°C): Critical pressure (MPa): Logarithm of the octanol/water partition coefficient: Solubility: Insoluble in water (20 °C). Other physical and chemical properties: Part X – Stability and reactivity. Stability: Stable. Prohibited substances: No data available. Conditions to avoid contact: No data available. Polymerization hazards: Does not occur. Hazardous decomposition products: No data available. Part XI: Toxicological Data Acute toxicity: LD50: >5000 mg/kg (oral, rats); LD50: >3000 mg/kg (dermal, rabbits). When vapors/dust are generated: Inhalation can cause edema of the respiratory system. Symptoms not to be ruled out: Pneumonia. After ingesting a large amount: Gastrointestinal discomfort. Other data: Proper handling of this product does not pose any hazards; care should generally be taken when handling it. Part XII: Ecological data. Ecotoxicity: Daphnia toxicity: Daphnia EC50: >1000 mg/l. Fish toxicity: Fish LC50: >1000 mg/l. Microalgae toxicity: Microalgae IC50: >1000 mg/l. Other ecological data: It can accumulate in organisms. It can float on the water surface. Other harmful effects: Proper handling of leaks will have no impact on the ecosystem. Part Thirteen: Disposal Waste properties: Disposal methods: There are no unified **regulations** for the disposal of chemical residues. Chemical residues are generally classified as special waste. Refer to ** and local relevant regulations before disposal. We recommend that you contact the relevant authorities or approved waste disposal companies, who will advise you on how to dispose of special waste. Packaging: Refer to ** and local relevant regulations before disposal. Treat contaminated packaging in the same way as external pollutants. Unless otherwise specified, uncontaminated packaging can be treated as household waste or recycled. Part 14: Transport Information. Hazardous goods code: Packaging mark: UN number: Packaging category: Part 15: Regulatory information. Part 16: Other information

I can help write up the MSDS for liquid wax; feel free to contact me – see my profile picture