Feed load of the gasifier
Thread Content
I would like to ask everyone: what load does your facility use when feeding material into the gasifier? (The load is calculated based on the coal slurry flow rate.)
We are at half load, 27 m3/h.
Basically, feeding is done at half load, and there seems to be a reason for this – half load is considered the optimal level
Both the design value and the actual value are at half load
60% load, slurry flow rate 52 cubic meters
It should all be at half load; this is related to the gasification requirements, right?
The feed load for water-coal slurry gasification should preferably be no less than half load; 50-60% is sufficient. .