Has anyone heard of the Ingle 600 welding rod for stainless steel? It is said to be usable in environments with temperatures over 1,000 degrees
Thread Content
This post was last edited by penryn on 2010-11-28 at 17:44. Has anyone heard of Ingler (I’m not sure if that’s the correct spelling) 600 stainless steel welding rods? These are stainless steel rods that are said to be suitable for use in environments with temperatures over 1,000 degrees, such as in containers used for natural gas decomposition; they are made of Inconel 600, a nickel-based material
I’ve never heard of this name, but I do have stainless steel welding rods that can withstand temperatures over 1000°C.
It should be Inconel 600, an Inconel alloy, or Incoloy, which are nickel-chromium-iron-based alloys
Reply to 3# chichenyu :'( Thank you so much, so many thanks
It should be a nickel-chromium-iron-copper alloy; the welding rod should be ENiCrFe3 or ENiCrMo3, with the choice depending on the actual circumstances.
Reply 1# penryn: It should be the 182 welding rod ENiCrFe-3 (INCONEL 600\601\690). The 182 welding rod (ENiCrFe-3) is suitable for manual arc welding of INCONEL 600\601\690 alloys. The weld metal formed with this electrode possesses high high-temperature strength and oxidation resistance, and can meet the stringent requirements of X-ray radiographic testing. Standard: AWS 5.11 ENiCrFe-3 electrode with property 182 (ENiCrFe-3) is suitable for manual arc welding of INCONEL 600\601\690 alloys. The weld metal formed with this electrode possesses high high-temperature strength and oxidation resistance, and can meet the stringent requirements of X-ray radiographic testing. Weld rod 182 has a wide range of applications and can be used for welding dissimilar materials, such as INCONEL series alloys, INCOLOY series alloys with carbon steel, stainless steel, nickel, and MONEL series alloys ； Welding of MONEL series alloys and carbon steel ； Welding of nickel and stainless steel ； Welding of stainless steel and carbon steel. Welding rod 182 is suitable for all-position welding, and direct current positive polarity should be used during welding. Typical values of the composition of the deposited metal (%): CSiMnCrNiFeCb+Ta: 0.04, 0.86, 0.015, 0.66, 8.16, 0.70, 0.15; PSTi: 0.001, 0.005, 0.1. Typical values of the mechanical properties of the deposited metal: Property – Typical value/Minimum value; Yield strength RP0.2: 370 N/mm2; Tensile strength RM5: 80 N/mm2; Elongation A5: 36%