What is the method of transporting ammonium monophosphate and potassium sulfate powder?
Thread Content
Dear colleagues at Gaota Sea, in order to provide a comfortable working environment for the operators, would it be feasible to use buried scraper conveyors for transporting ammonium phosphate monohydrate and potassium sulfate powder in the high tower? Which method is generally better for crushing powder materials? Also, is it necessary to use a method of screening first, then crushing, and finally dust removal for the powder material? Everyone, come up with some ideas!
Consider pneumatic conveying – it features low losses and a high degree of automation
I suggest you take a look at this post... http://bbs.hcbbs.com/viewthread.php?tid=413878&highlight=%B8%DF%CB%FE%B8%B4%BA%CF%B7%CA
Powders such as monoammonium phosphate and potassium sulfate are not suitable for pneumatic conveying due to their high specific gravity and large particle size. Pneumatic conveying is generally used for powders without crystalline water and with a particle size of 100 microns or less. To save space at the work site and reduce the conveying distance, a bucket elevator can be installed in the vertical space between the crusher and the vibrating screen; scrapers are more suitable for conveyances with an angle of less than 30 degrees, and are not as effective as screw conveyors. Dust removal can be installed above the silo. Dust removal external fan.
What was said on the fourth floor is correct; Stanley is using a lift right now
Pneumatic conveying is not only used for transporting powders; it’s also used to transport many types of particles, including large ones, as well as iron pellets, haha
How can iron pellets be transported upstairs?