What material is best for gasketing in wet chlorine gas pipelines?
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 22:24. What material is best for gasketing wet chlorine gas pipelines? # + + .
We’re already in the ninth grade – why bring up this question still?
EPDM gaskets are used for chlorine pipelines
We use PTFE gaskets and G3500 gaskets
The objections raised on the second floor are not valid; on the contrary, I think it’s good that this issue was brought up. The use of chlorine-based gaskets should be determined based on specific circumstances – for use in turbines, tetrafluoroethylene gaskets can be chosen, while for applications at normal pressure with low levels of impurities, EPDM gaskets are a suitable option.
Graphite gaskets can also be used; they are certainly resistant to oxidation and corrosion.
Reply to 2# 9tnt: Hello, it seems you are an expert in the chlor-alkali industry; well learned.
Tetrafluorine gaskets are quite good; they are resistant to acids, alkalis, and corrosion
Depending on the situation, both CPVC cushions and PTFE pads are widely used
It’s best to use PTFE gaskets directly – it’s hassle-free and safe.