One Question per Day on Refining Knowledge (Technology) 110108

Thread Content

We welcome everyone to actively participate in the learning and discussion of professional basic knowledge in the refining technology exchange area! In accordance with the forum’s uniform requirements, the maximum score for this activity is 5 Wealth points, and it is prohibited to assign charm scores. At the same time, friendship requests and repeated ratings are declined. Be careful when posting; editing is ineffective! Those who have different opinions on the provided answer keys can post discussions the next day; those who provide solutions or their own opinions regarding the answer key for the daily question will receive appropriate rewards! The focus is on participation, and there are prizes for participating! ) 1. The measures to be taken when the furnace temperature is excessively high are (　　). A. Adjust the distribution of the burners in use to be even. B. Ensure that the flow rate of the heating medium through the furnace tubes is the same. C. Adjust the oil nozzles. D. Reduce the load on the heating furnace. 2. If it is found that the liquid level inside the tank does not match the reading on the glass level gauge, then this indicates (　　). A. The glass plate level gauge is functioning properly. B. The glass plate level gauge is not working correctly. C. It is inappropriate to use a glass plate level gauge at this location. D. Operations inside the tank are normal. 3. What are the phenomena that occur when steam is blown at the bottom of the tower and water is carried along with it? (　　) A. Rise in bottom temperature of the tower ； The liquid level at the bottom of the tower rises ； B. The bottom temperature of the tower decreases ； The liquid level at the bottom of the tower decreases; C, and the temperature at the bottom of the tower rises ； Decrease in the liquid level at the bottom of the tower D, decrease in the temperature at the bottom of the tower ； The liquid level at the bottom of the tower rises by 4. When the packing in the distillation tower catches fire severely (　　). A. Sintered filler B. Drop in tower top temperature C. Drop in tower bottom temperature D. Explosion inside the tower 5. If hot residue oil is introduced into a tank without first removing the water present at the bottom of the tank, the water boiling violently when it comes into contact with the hot residue oil can easily cause damage to the tank (　　). A. Over-temperature B. Over-pressure C. Rapid condensation leading to frost cracking D. Difficulty in oil supply. Please hide the reply; the correct answers can be seen in the reply: D B B A B