Is there a new version of the as-built drawings? **Are there any relevant requirements?
Thread Content
This post was last edited by Huajianren on 2011-4-2 at 14:34. On some of our company’s as-built drawings, the seal placed there was issued by the design institute; it contains information about the design institute but no details related to the construction party. I’m not sure whether such drawings are valid, and whether the construction party needs to apply another seal as well
Since it’s a as-built drawing, of course it needs to be stamped with the construction company’s seal
What I mean is whether another seal from the construction company should be added next to the completion seal from the design firm
If it is a \"as-built drawing,\" a \"as-built stamp\" is required; such a drawing can be prepared either by the construction company or by the design institute.
Some as-built drawings also do not require a stamp. Generally, the construction drawings are issued as-is without any modifications, and a completion stamp is applied. If the drawings are revised and reissued, the drawing number and phase should be changed to those relevant for as-built drawings. It is not necessary to stamp it. Whoever prepares it shall stamp it! Both design institutes and construction companies are fine!